6" Tri-clamp Super Filter Assembly
6" Tri-clamp Superfilter Assembly

6" Tri-clamp Super Filter Assembly

Your Price: $1,320.00
Part Number:6inch_TC_SuperFilter

Choose Options

Sintered Media - 1st Disc
Sintered Media - 2nd Disc
Sintered Media - 3rd Disc
What size hose barbs would you like?

Description:
The Super Filter assembly is amazing. It will filter down to extremely small micron levels. This Super Filter combines a set of three sintered media filtering discs contained within a 6" tri-clamp assembly to filter your materials with the finest filtration ratios.

The assembly consists of the following:

- (3) 6" Tri-clamp 316L Stainless Sintered Media Filtering Discs (Choose from 0.2, 0.5, 2, or 20 micron - MUST PICK 3 sizes, it is recommended to step down in size as you filter to catch debris not caught by the first filtering disc and so on)
- (3) 6" Tri-clamp Viton Split Gaskets (for filtering discs)
- (3) 6" Tri-clamps
- (2) 6" x 1 1/4" Tri-clamp mini spools
- (2) 6" Tri-clamp Domes with 2" Tri-clamp Ends
- (2) 2" Tri-clamps
- (2) 2" Tri-clamp hose barbs (Choose from None, 1/2", 3/4", or 1")

What Is Sintered Media?

Sintered Media is an extremely strong media that begins as a stainless steel powder. The powder is then molded and pressed into a thin cake-like material where it is exposed to extreme heat to form it into a thin flat plate of material that's extremely strong but is still porous.

The key to sintered media is in the stainless steel powder used to form itIt has tiny beads that are a certain micron size. When molded and pressed together and then exposed to heat, the powder creates a thin plate with pores in the material. It ends up as the same thickness as the beads they began with.

Why Use Sintered Media?
Typical small micron stainless steel mesh requires a larger micron mesh backer to give it strength. Otherwise, when exposed to extremely high pressure, it can have a blowout and need to be replaced. With Sintered Media being thicker and more rigid, it can withstand a fair amount of pressure compared to the stainless steel mesh of the same micron level and less prone to blowouts.

Having the finer micron level in a sturdy disc makes for easier production and even faster in some cases such as cannabis production, water filtration, beverage production and so much more!

Sintered Media Options
Sintered Filtering Media is available in the Super Filter in 0.2, 0.5, 2, 5, 10, 20, 40 and 100 Micron levels. (Call or email us for  availability on microns not available in the dropdown)

Sintered Media Filtering Discs and Recommended Applications
We can fabricate sintered media filtering discs for most tri-clamp sizes. Once the micron of your choice is cut into a disc to fit your tri-clamp fittings, we then can add a split gasket to the disc for it to be installed into your tri-clamp assembly. We do highly recommend a space on either side of the sintered filtering media discs in your assembly. This allows optimum flow through the entire assembly and also helps prevent early plugging of the filtering disc. We also recommend that if you're placing the sintered media filtering disc on the end of your tri-clamp assembly that you cap it with a domed fitting to allow adequate space behind the disc for whatever you're filtering to pass unobstructed.


MAY TAKE UP TO 6 WEEKS TO BUILD AND SHIP BASED ON SINTERED MEDIA AVAILABILITY

Related Items